环氧树脂网

当前位置: 主页 > 聚氨脂 >

4030A/4030B Domes Resin

品牌:无锡惠隆电子材料有限公司 单位:王强 13771533715 上架日期:12-06-08 10:38 人气:
产品介绍
  

4030A/4030B  Domes Resin

characteristics
Our domes resin 4030A/4030B is a two-component, room temperature curing product. It doesn’t contain solvents or any other volatile materials. It produces a clear, attractive and protective coating. The thickness is about 1.5~2 mm with three-dimensional effect. Our products can be widely used in producing various kinds of label, nameplates as well as decorations. What’s more, because of its excellent resistance to weathering and ultraviolet light, our resin satisfies the strict requirements of auto industry. The outdoor use resin is guaranteed against yellowing when exposed to sunlight for a period of three years at least.  
components
4030A is polyisocyanate, 4030B is polyalcohol, no matter using by machine or by hand, the products can meets customer’s requests of different hardness, curing time and viscosity. 
before curing  

Item
Condition
4030A
4030B
Appearance
Observe 
Colorless transparent liquid
Colorless transparent or light yellow liquid
Viscosity
25 mpa·s
900±200
300±100
Density
25 g/cm3
1.13±0.05
1.05±0.05
Storage
25℃, sealed
6 months
6 months


 
working process
Here the techinics can be divides into two kinds: manual process andmachine process, the former one cures longer than the later one.
1manual process
a    Keep 4030A/B in the room with the temperature of 15~25 and the humidity < 70% for 24 hours before use. 4030A may rime in low temperature, please warm up to 30~40 till it turns to clear liquid
bPut label on the worktable and fix with adhesive tape.
cClean the dust and dirt on the label
dWeigh 4030A/B correctly, the weight ratio is 100: 55. Stir them adequately.  
eVacuum the mixture to de-bubble
fInject on the surface of label
gmake the liquid all around the surface with needle, and break the bubble
hPut the label in the clean room of 15-25 and humidity <70% for 24 hours
 2machine process
   Keep 4030A/B in the room with the temperature of 15~25 and the humidity < 70% for 96 hours before use to eliminate bubbles
   Put the pump respectively into 4030A and 4030B, sealed and fixed, leave them still.
  Put label on the worktable and fixed with adhesive tape.
  Clean the dust and dirt on the label
   wash blender, pipe and injecting pinhead with dichloromethane
   inject 4030A/B into the machine in advance to eliminate bubbles from blender, pipe and injecting pinhead 
   inject on the surface of label
  make the liquid all around the surface with needle, and break the bubble
  Put the label in the clean room of 15-25 and humidity <70% for 24 hours
ration
    4030A/B=10055±3 by weight
after curing

Item
Condition
4030A4030B
Appearance
Observe
Colorless, clean and slick
Hardness
Shore-A
70±10
 Tensile strength
MPa
>20
Elongation at break
%
>200

Package
Packaged in metal drum of 20KG, 50KG or 200KG
cautions
1.        Not belong to dangerous goods, can be delivered as common ones
2.        Store it at the cool and dark place(15-25  humidity<70%) 
Weigh up 4030A/B correctly and stir them adequately. Pot life may shorten if the amount is more than 100g.
Note: the data above3 are typical tested at relative humidity of 70% and a temperature of 25. They are just for reference. We cannot guarantee all the listed data will be reached under specific test conditions. When applying the product, the customers should use data obtained through their own testing.
 
分享到:
发表评论
请自觉遵守互联网相关的政策法规,严禁发布色情、暴力、反动的言论。
评价:
表情:
用户名: 验证码:点击我更换图片
栏目列表
关于我们 | 广告合作 | 版权声明 | 网站地图 | 联系我们 | 环氧树脂 | 稀释剂 | 固化剂 | 消泡剂 | 脱模剂